Hardwood floors come in a variety of types, sizes and finishes. Depending on your budget, they can range from a few dollars at the very inexpensive end to thousands of dollars or more. The good news is there are several ways to reface your hardwood floors for only a fraction of the price. Assuming you’re using a professional and aren’t doing it yourself, refinishing hardwood floors in no time costs only a few dollars. There are some factors which will increase the price, such as the actual wood type it’s being applied to, the quality of the finish product, how many coats are required and the company you’re going to hire to do it.
Refinishing hardwood flooring with an acid-free wood finish is the least expensive of all the methods. Using this method involves sanding the floor down to the bare wood foundation, then applying two coats of a neutral shade wood finish. One coat of clear lacquer must be used to seal and protect the floor, and another coat will be used to help protect the finish and to enhance the color. The pros of this finish include minimal maintenance and durability, and the cons of using this finish include staining, fading and brittleness of the wood.
Two coats of an oil-based urethane finish are available for hardwood floor refinishing. The urethane sealer helps prevent dust and dirt from getting into the house, as well as from creating imperfections in the finish. This finish is also easy to clean, requiring only a quick sanding after the surface has been stained. The pros of this finish include moderate maintenance, lasting several years and excellent durability, but it’s important to note that the urethane may not withstand high traffic or might chip.
A more popular method is hardwood floor refinishing with an epoxy resin. Like the resin-based finishes, there are pros and cons associated with this type of hardwood flooring. Like urethane finishes, there’s little maintenance involved, but this type of hardwood floor refinishing can have a wide variety of drawbacks, including staining, fading and brittleness. If you don’t want a smooth, even finish, this may be the right choice. However, this type of flooring needs to have a consistent sanding and buffing and must be finished and protected frequently. In addition, this type of hardwood floor refinishing is prone to peeling and chipping.
The least expensive way to refinish hardwood floors is to use a non-varnish finishing. Non-varnish finishes contain alcohol, which causes the wood to become stained. These types of finishes are good for light staining, because they’re not as sensitive to abrasion or scratches. However, they’re not good for removing stains or protecting the floor against spills. They can also chip fairly easily.
The pros of hardwood floor refinishing include moderate maintenance, low cost and durability, but the cons include staining, fading and occasional peeling or chipping. When choosing a non-varnish finish, look for one that contains either buffering or fining. This will help protect the finish if you spill something. You should also consider the pros and cons of your own home and shop, depending on the types of materials and colors you’ve chosen. The pros and cons of each choice will help you make a better decision. Hardwood Floor Refinishing San Diego is a small, family owned hardwood floor contractor in southwest Florida. Call them for any of your hardwood related needs.