Pros and Cons of Hardwood Floor Finish

Hardwood floors come in a variety of types, sizes and finishes. Depending on your budget, they can range from a few dollars at the very inexpensive end to thousands of dollars or more. The good news is there are several ways to reface your hardwood floors for only a fraction of the price. Assuming you’re using a professional and aren’t doing it yourself, refinishing hardwood floors in no time costs only a few dollars. There are some factors which will increase the price, such as the actual wood type it’s being applied to, the quality of the finish product, how many coats are required and the company you’re going to hire to do it.

hardwood floor refinishing

Refinishing hardwood flooring with an acid-free wood finish is the least expensive of all the methods. Using this method involves sanding the floor down to the bare wood foundation, then applying two coats of a neutral shade wood finish. One coat of clear lacquer must be used to seal and protect the floor, and another coat will be used to help protect the finish and to enhance the color. The pros of this finish include minimal maintenance and durability, and the cons of using this finish include staining, fading and brittleness of the wood.

Two coats of an oil-based urethane finish are available for hardwood floor refinishing. The urethane sealer helps prevent dust and dirt from getting into the house, as well as from creating imperfections in the finish. This finish is also easy to clean, requiring only a quick sanding after the surface has been stained. The pros of this finish include moderate maintenance, lasting several years and excellent durability, but it’s important to note that the urethane may not withstand high traffic or might chip.

A more popular method is hardwood floor refinishing with an epoxy resin. Like the resin-based finishes, there are pros and cons associated with this type of hardwood flooring. Like urethane finishes, there’s little maintenance involved, but this type of hardwood floor refinishing can have a wide variety of drawbacks, including staining, fading and brittleness. If you don’t want a smooth, even finish, this may be the right choice. However, this type of flooring needs to have a consistent sanding and buffing and must be finished and protected frequently. In addition, this type of hardwood floor refinishing is prone to peeling and chipping.

The least expensive way to refinish hardwood floors is to use a non-varnish finishing. Non-varnish finishes contain alcohol, which causes the wood to become stained. These types of finishes are good for light staining, because they’re not as sensitive to abrasion or scratches. However, they’re not good for removing stains or protecting the floor against spills. They can also chip fairly easily.

The pros of hardwood floor refinishing include moderate maintenance, low cost and durability, but the cons include staining, fading and occasional peeling or chipping. When choosing a non-varnish finish, look for one that contains either buffering or fining. This will help protect the finish if you spill something. You should also consider the pros and cons of your own home and shop, depending on the types of materials and colors you’ve chosen. The pros and cons of each choice will help you make a better decision. Hardwood Floor Refinishing San Diego is a small, family owned hardwood floor contractor in southwest Florida. Call them for any of your hardwood related needs.

Different Options for Garage Floor Sealers

Before constructing a garage floor, you are advised to choose a floor that fits all your requirements and is within your budget. Different floor coating improves your garage as you can decide whether to use rigid plastic combined with tiles or decide to use rollout floor mats with epoxy coatings. Floor paint coatings and covers prevent your garage floor from being affected by stains, hide cracks, and make it easier for you to clean the floor.

Two general types are available for your garage floor, that is coatings and coverings. Different types of coatings include concrete floor paint, DIY garage floor coating made op paint, and DIY garage floor coating made of concrete strain, DIY garage floor made of concrete sealers. Coverings are used when you want to hide cracks and wide holes without using mortar. The advantage of coverings is that they are fast and easy to use but are expensive than coatings. Some coverings include; rigid tiles, rollout mats, flexible interlocking tiles, and ordinary vinyl tiles.

Discussed below is an overview of different sealer options for your garage floor:

  1. Latex sealer.

It is just like a floor paint, which is more exposed to corrosive chemicals and less tough than the proxy. It only benefits by annual protective waxing, or you will be required to reapply them after some years of use. These sealers work best when used with the concrete floor because they stick better on them than the urethane sealers, making it a choice to use a premier for oil-based floor paint or rather epoxy.

  1. Urethane sealer.

This is a tough sealer compared to acrylic sealer but doesn’t fit well when used in a bare concrete floor. The sealer provides high gloss and clear finish that is not easily affected by chemicals making it preferable over epoxy and concrete stain. The setback involved with this sealer is that it is more expensive than other sealers whereby new versions that are solvent-based require the use of a respirator when applying.

In a nutshell, sealers are like floor paints except that they’re tougher, and they come after paints because of their less costly nature. Sealers are easy to apply by using a brush and roller, making them dry into a clear or semi-gloss product depending on the product chosen. You are therefore advised to use these sealers because they are of different versions to suit your garage best depending on whether you need a water-based or solvent-based version.

Deciding between Engineering Wood Flooring and the Real Thing

Engineering Wood is a wood made of layers that contains the hardwood and plywood. While the standard wood, Solid wood, has multi-layers of wood. Another distinct feature of the two is that the engineering wood is more durable than the solid hardwood.

Some of the features to consider when deciding on the two kinds of wood include:

  1. Appearance. The solid wood flooring is narrower than engineering wood flooring. The solid wood has tight seams between boards while the engineering wood is wider and has slight grooves between boards.
  2. Water and Heat resistance. Engineering wood flooring is better in humid conditions because of its plywood that makes it’s more stable. The solid wood is not advisable in humid conditions because it can swell and warp.
  3. Installation. When installing, engineering wood flooring is the best than solid wood. The solid wood needs a nail down of installation. Various methods can be considered on the engineering one, installation of the click-clock or glue- down forms are used.
  4. Cost. The engineering wood is less expensive than solid wood. This is because of the worthiness of the engineered wood. The engineering wood has a long lifespan if not refinished than solid wood.
  5. Durability and Maintenance. Solid wood can be refinished several when it wears out. The engineering wood flooring it’s only refinished once because of its exhausting hardwood layer.
  6. Care and Cleaning. Both the solid and engineering flooring is easy to clean by using a vacuum. Sweeping also can be recommended but when it comes to mopping, water and steam are not advised to clean any wood surface. A wood cleaned can do.

 If you decide to use a wooden floor, search for enticing and long-lasting unique wood flooring to increase your home value. Ultimately, engineering wood flooring uses less wood compared to the solid wood hence it’s highly recommendable.